Harness For Dogs With Their Own Hands We Make A Stylish Collar
Recently, harness for dogs with their own hands is gaining immense popularity, because what kind of owner does not want the best for his pet. Not every dog is suitable collar, the pet is trying to escape from it to walk on freedom, and the leash pulls cartilage tissue around the neck, and the pet may suffocate. Therefore, more and more dog lovers prefer harness.
The process of manufacturing braces for the shepherd can be traced by the example of step by step instructions.
For this you will need a nylon sling, a width of 15-30 mm, felt, solid steel rings, a durable thread, a buckle lock and two three-slot buckles.
To create any harness, you must take measurements from the dog.
Then we begin to cut the harness. Kroyku can be traced to the following photo.
Next you need to open the lining. There are three such parts, the size of which is exactly the same as the first, second and third parts. Details of the lining fabric are cut out twice as wide, then folded in half and narrowed in the middle.
In this subparagraph we will collect all the blanks, starting with (B). On the edge we stitch the lining and the kapron line, we do only in the middle of the line. From the ends, we form a loop of the slings so that other parts can be threaded. On top you need to sew everything in the form of a square and its diagonals, as shown in the photo.
Billets (A – D) and (B – D) need to be assembled in exactly the same way. From the side where the ring will be, you need to leave a little space just for the hem, and on the opposite side where the buckle is, we leave space for the buckle and the hem.
The next item can be traced in the photo.
To assemble the harness you need to make two more parts. The ring needs to be stitched from one side, and from the opposite buckle-lock.
Next, adjust all the details for the desired size. We make the first fitting: push the paws into the harness and fasten the lock on the harness. For loose rings, tighten the harness to the required size so that it does not squeeze the dog.
This harness is also suitable for likes.
Idea for small dogs
You can also stitch a harness for small dogs, for example, for a pug. This type of harness is perfect for York. An example of sewing can be traced to the next master class.
For work you will need a piece of fabric, faux suede and velcro.
Pattern Harness where allowances are already included. Darker color shows the front side.
Fold the harness in half and cut the blank out of regular fabric and suede. On the ground, where the rectangles are located, there should be adhesive tapes.
Now you need to draw the edge. Cut a strip, the width corresponds to the diameter of the ring for a leash.
Fold to the middle.
Exactly the same size cut a strip of adhesive material.
After two rings stretch the strip.
We have a strip in the middle and iron it with an iron.
Decorate the edges of the ribbon. We strip the strip and select the area where the rings are located.
Hands sew Velcro.
Look at the selection of photos, how exactly the harness sits on different breeds of dogs.
Video on the topic of the article
We offer to watch a selection of video on how to make a harness for different breeds of dogs.