Skip to content

How To Put A Harness On A Dog

Dog owners are increasingly wondering how to properly wear a harness to an animal? You should first understand what is this harness, and what it is. After all, the type of dressing depends on the variety.

Definition and species

A harness for dogs is a type of ammunition that has numerous advantages over an ordinary leash. Some pet owners do not understand that if you pull the collar, the animal is harmed.

Harnesses help implement a minimum of action to control the animal. This type of ammunition strengthens the relationship between the owner and the dog. It becomes easier to manage a pet, because it begins to feel the owner better.

Today these types of ammunition are distinguished:

  • Ordinary walking harness. In them the ring of fastening is located at the level of the withers of the dog. Such teams are relevant for everyday walks.
  • Towing harnesses. This type of ammunition is used in sports competitions, dog sledding races. This attribute is called a ride harness. It is characterized by high strength belts. Such attribute is fixed extremely reliably.
  • Harnesses with weights. They are used to strengthen the muscle mass of the dog. As a rule, such harnesses are worn, if the dogs have had broken legs or other limbs, they regulate the weight of the load.
  • Many dog ​​experts agree that dogs need to periodically change the harnesses on the collar. That is, you can not wear them often. This can cause problems with the spinal cord and neck of the animal.

    Features of putting on

    To properly wear a dog harness, you need to follow this sequence:

  • If the animal is violent, then you need to capture it in the back area, secure it between your legs. At the same time, it is necessary to straighten the leash so that its non-solid surface is located on the inside.
  • Then a ring-shaped closed object must be put on the dog.
  • Hold the other side of the strap to the required position, limiting the space between the jumper and the closed circle.
  • Continue wearing, pushing the animal’s paw directly into the location between the strap and the closed circle.
  • The jumper slips across the surface of the chest area, put a strap on the right side. All manipulations need to be done carefully.
  • In conclusion, you should let go of the pet, adjust the circle on the neck so that it does not choke the animal, but it is snug. Then check whether all the mechanisms are well buttoned.
  • When performing such actions, you can not rush, otherwise you can fasten the harness incorrectly – and the belt will be unbuttoned. It is important that the dog was comfortable. Between the body of the animal and the belt should be palm.

    If a towing harness is used, the main belt should be directly on the front of the chest. This will allow you to evenly distribute the load. The ring should not then be located at the withers. It will upset the balance. The ring in the towing strap must be secured to the dog’s croup. It is attached by post-hems or slides along them. This nuance depends on the design features.

    If guard patches are used (mainly in puppy age), it means that the design is focused on protecting the neck from injury. These collars are different position of the chest belt. It is placed directly between the front legs of the dog. The leash is attached to the rings directly above the withers of the pet. Buying a harness, it is important to check the ring. It is advisable to pay attention to the place of attachment, and to the connection of the straps at the withers.

    Choosing a harness, you need to decide on its purpose. Lightweight nylon harnesses are suitable for towing. They do not have additional rings and buckles. However, a cable is provided for fasteners. For classes with pets, it is better to choose leather belts. Their buckles are sturdy, and their belts are wide. Rivets must hold tight. It is important to pay attention when putting on. Belts must be carefully sewn, and the rings must be firmly soldered. Suitable and a combination of leather and nylon. It is easier and cheaper.

    Miniature doggie with a thin neck and a delicate neck instead of collars, it is better to wear velor straps. They can be decorated with crystals or rhinestones.

    Dog owners are increasingly wondering how to properly wear a harness to an animal? You should first understand what is this harness, and what it is. After all, the type of dressing depends on the variety.

    Definition and species

    A harness for dogs is a type of ammunition that has numerous advantages over an ordinary leash. Some pet owners do not understand that if you pull the collar, the animal is harmed.

    Harnesses help implement a minimum of action to control the animal. This type of ammunition strengthens the relationship between the owner and the dog. It becomes easier to manage a pet, because it begins to feel the owner better.

    Today these types of ammunition are distinguished:

    • Ordinary walking harness. In them the ring of fastening is located at the level of the withers of the dog. Such teams are relevant for everyday walks.
    • Towing harnesses. This type of ammunition is used in sports competitions, dog sledding races. This attribute is called a ride harness. It is characterized by high strength belts. Such attribute is fixed extremely reliably.
    • Harnesses with weights. They are used to strengthen the muscle mass of the dog. As a rule, such harnesses are worn, if the dogs have had broken legs or other limbs, they regulate the weight of the load.

    Many dog ​​experts agree that dogs need to periodically change the harnesses on the collar. That is, you can not wear them often. This can cause problems with the spinal cord and neck of the animal.

    Features of putting on

    To properly wear a dog harness, you need to follow this sequence:

    1. If the animal is violent, then you need to capture it in the back area, secure it between your legs. At the same time, it is necessary to straighten the leash so that its non-solid surface is located on the inside.
    2. Then a ring-shaped closed object must be put on the dog.
    3. Hold the other side of the strap to the required position, limiting the space between the jumper and the closed circle.
    4. Continue wearing, pushing the animal’s paw directly into the location between the strap and the closed circle.
    5. The jumper slips across the surface of the chest area, put a strap on the right side. All manipulations need to be done carefully.
    6. In conclusion, you should let go of the pet, adjust the circle on the neck so that it does not choke the animal, but it is snug. Then check whether all the mechanisms are well buttoned.
    How To Put A Harness On A Dog

    Read more:  How To Choose A Harness For Dogs For A Specific Breed

    When performing such actions, you can not rush, otherwise you can fasten the harness incorrectly – and the belt will be unbuttoned. It is important that the dog was comfortable. Between the body of the animal and the belt should be palm.

    If a towing harness is used, the main belt should be directly on the front of the chest. This will allow you to evenly distribute the load. The ring should not then be located at the withers. It will upset the balance. The ring in the towing strap must be secured to the dog’s croup. It is attached by post-hems or slides along them. This nuance depends on the design features.

    If guard patches are used (mainly in puppy age), it means that the design is focused on protecting the neck from injury. These collars are different position of the chest belt. It is placed directly between the front legs of the dog. The leash is attached to the rings directly above the withers of the pet. Buying a harness, it is important to check the ring. It is advisable to pay attention to the place of attachment, and to the connection of the straps at the withers.

    Choosing a harness, you need to decide on its purpose. Lightweight nylon harnesses are suitable for towing. They do not have additional rings and buckles. However, a cable is provided for fasteners. For classes with pets, it is better to choose leather belts. Their buckles are sturdy, and their belts are wide. Rivets must hold tight. It is important to pay attention when putting on. Belts must be carefully sewn, and the rings must be firmly soldered. Suitable and a combination of leather and nylon. It is easier and cheaper.

    Miniature doggie with a thin neck and a delicate neck instead of collars, it is better to wear velor straps. They can be decorated with crystals or rhinestones.

    How to put on a dog harness How? So!

    The kind of harness can be confusing and frightening if you have never worn it on a dog before, but in reality it is quite simple to do it, unless, of course, you have to deal with an extremely mobile dog. Let’s tell about how various types of shleek are put on.

    Method 1 Plain Harness

    1. 1 Sit behind the dog. When the dog is in a sitting position, go behind it and sit down so that you can comfortably and easily carry out manipulations on the back, from the sides and in front of the dog.
      • A dog can also stand if it is calm and does not move. However, do not try to wear a harness if the dog is agitated, as you may injure it.
      • You cannot wear a harness on a reclining dog.
      • You can also wear a harness in the front, but in this case the dog behaves more restlessly, so it is usually recommended to wear the harness in the back.
      • 2 Put the dog harness on the head. Both loop loops (both lower and upper) must be put on the dog’s head.
        • The lower loop is larger than the upper loop, both of which are parallel to each other.
        • Make sure the buckle on the strap is unbuttoned when you put the harness on the dog’s head.
        • The vertical support strap should be placed on the chest of the dog.
        • 3 Slide the first paw into the corresponding hole for the paw. On the side of the first two loops that you put on your dog’s head, there must be another loop or hole. Raise the dog’s appropriate paw and gently slide it into the hole.
          • The other loop for the paw is not yet closed, but you should notice its two ends, connected by a buckle, and understand where it is.
          • 4 Hold the strap behind the dog’s paw. An un buckled buckle strap should go under the dog’s other front paw and step forward along the side of the dog. Connect the ends of the strap with a buckle.
            • Remember that the second hole for the paw is formed at the end of this step.
            • After him the harness is fully worn on the dog.
            • 5 Adjust the harness properly. Make the necessary adjustments so that the harness sits on the dog as it should. The general rule is the ability to stick two fingers under the straps of the strap.
              • Pull the buckle. She should not be unbuttoned. If this happens, it means that the harness is too tight.
              • Try to pull the harness over your head. It should not move. If this happens, you need to tighten the harness tighter.
              • Check before. Pull the harness behind the front to make sure that the loops for the paws are not too loose, and the dog will not be able to pull the paws out of them.
              • Make sure the D-ring is placed on the back of the dog. The front loop should be positioned at the middle of the dog’s chest.
              • 6 Fasten the leash. The harness is dressed. When you hook the leash on the D-ring on the harness, you can go for a walk with the dog.

              Method 2 Front Strap

              1. 1 Sit behind the dog. When the dog is in a sitting position, go behind it and sit down so that you can comfortably and easily perform the manipulations on the back and chest of the dog.
                • A dog can also stand if it is calm and does not move. However, do not try to wear a harness if the dog is agitated, as you may injure it. You cannot wear a harness on a reclining dog.
                • You can also wear a harness in front, but in this case the dog behaves more restlessly, so it is usually recommended to wear a harness from the back or side.
                • 2 Put the dog’s shoulder loop over the head. Put on the loop created by the shoulder and chest straps on the dog’s head. The shoulder strap should be placed on the shoulders of the dog.
                  • Unbutton the abdominal strap before wearing the harness
                  • The shoulder and chest straps are almost perpendicular to each other when they are in a stretched condition. Of the two straps perpendicular to the shoulder strap, the chest is the one that is longer.
                  • In many models, the shoulder strap and chest strap are the same color, while the abdominal strap has a different color.
                  • After putting on the shoulder strap, adjust it so that the circular connecting ring is centered between the shoulder blades of the dog.
                  • 3 Fasten the abdominal strap into place. Hold the abdominal strap under the belly of the dog and fasten it to the buckle on the other side.
                    • Adjust the shoulder and abdominal straps so that they sit comfortably. In the case of small and medium dogs, you should be able to stick your finger under the straps. In the case of large dogs, it should be possible to stick two fingers under the straps.
                    • Equipment in general, consisting of shoulder and abdominal belts, should form a clear vertical line. The abdominal belt should not slide to the armpits of the dog.
                    • 4 Adjust the chest belt. The chest belt should be horizontal and pass through the brisket. Tighten or loosen the belt as required so that it lays down appropriately.
                      • Gently push your fingers on the lower part of the dog’s chest. So you can determine the position of the chest bone.
                      • Adjust the sides of the chest strap evenly so that the D-ring is centered on the front.
                      • The strap should not sag or bully.
                      • 5 Clip on the leash. The harness is dressed. After you fasten the leash, you can safely go for a walk with the dog.
                      Read more:  Teaching A Dog To Move In Harness

                      Method 3 Sleds

                      1. 1 Stand behind the dog. When the dog is in a sitting position, go behind it and bend down so that it is comfortable and easy for you to carry out manipulations on the whole body of the dog.
                        • The dog must sit. Her ass should be clamped between your legs.
                        • Do not try to do this when the dog is in an excited state, as you can hurt it.
                        • You will not be able to put a dog on a reclining dog.
                        • 2 Unfasten the team. Take the harness with both hands and undo its soft collar part. Fold the chest part in half so that the two ends of the wide bib meet.
                          • Use your fingers to pull out the soft collar part and nylon jumpers behind the bib. At this step you should see a hole for the head of the dog.
                          • 3 Put the dog harness on its head. Pull the dog’s hole on the head and adjust the fur and skin so that everything fits tightly, but the dog is comfortable.
                            • If the dog has medium or thick fur, place it under the harness straps. If this is not done, the harness will sit too tight on the dog, which will create pressure, friction, tucks and other discomfort when the dog is working.
                            • At this stage, the harness must pass through the dog’s brisket. It should also be located above the shoulder blades.
                            • Slide two fingers under the neck straps. If this fails, loosen them. If you can stick more than two fingers, tighten the straps.
                            • 4 Tighten paws one by one. Gently lift one dog’s front paw so that it will bend at the knee, and guide it into the appropriate loop of the harness.
                              • Repeat the procedure with the second paw.
                              • When properly executed, the bib will be placed vertically in the middle between the dog’s front paws along the sternum.
                              • As before, correct the team by checking the hemmed fur, excessive slack or tightness.
                              • 5 Pull out the tail section. The tail part of the harness should be flung down the back to the base of the dog’s tail.
                                • If the harness is of proper size, the tail section will reach exactly to the base of the tail.
                                • The straps of the harness must also lie flat on the back of the dog. If they are twisted, unwind them and lay again.
                                • 6 If applicable, stretch the back strap over the back. If you use a harness for a weight load on a dog, it must have a fastening strip for the lines in the tail area. This band passes through the back and goes under the tail.
                                  • Note that not all types of harness may have this band.
                                  • 7 Attach a lead, cables, straps for sleds or other belts. The harness should now sit well. Your dog is ready for action.
                                  • 8 Done.

                                  Tips

                                  • Pick a dog with a proper size harness. Each harness sold has recommended dog sizes based on weight, chest size and overall dog size. It is important to choose the correct size of the stitches. If the harness is too tight, you can cripple your pet. If she is too loose, the dog may jump out of it.

                                  What you need

                                  • Harness
                                  • Leash

                                  Sent: Kuzmina Julia. 2017-11-06 17:16:31

                                  How to put a harness on a dog

                                  Put the dog harness on the head. Both loop loops (both lower and upper) must be put on the dog’s head. The lower loop is larger than the upper loop, both of which are parallel to each other. Make sure the buckle on the strap is unbuttoned when you put the harness on the dog’s head. The vertical support strap should be placed on the chest of the dog.

                                  Slide the first paw into the corresponding hole for the paw. On the side of the first two loops that you put on your dog’s head, there must be another loop or hole. Raise the dog’s appropriate paw and gently slide it into the hole. The other loop for the paw is not yet closed, but you should notice its two ends, connected by a buckle, and understand where it is.

                                  Hold the strap behind the dog’s paw. An un buckled buckle strap should go under the dog’s other front paw and step forward along the side of the dog. Connect the ends of the strap with a buckle. Remember that the second hole for the paw is formed at the end of this step. After him the harness is fully worn on the dog.

                                  Snap on the leash. The harness is dressed. When you hook the leash on the D-ring on the harness, you can go for a walk with the dog.

                                  Sit behind the dog. When the dog is in a sitting position, go behind it and sit down so that you can comfortably and easily perform the manipulations on the back and chest of the dog. A dog can also stand if it is calm and does not move. However, do not try to wear a harness if the dog is agitated, as you may injure it. You cannot wear a harness on a reclining dog. You can also wear a harness in front, but in this case the dog behaves more restlessly, so it is usually recommended to wear a harness from the back or side.

                                  Put the dog’s shoulder loop over the head. Put on the loop created by the shoulder and chest straps on the dog’s head. The shoulder strap should be placed on the shoulders of the dog. Before wearing the harness, unbutton the abdominal strap. The shoulder and chest straps are almost perpendicular to each other when they are in a stretched state. Of the two straps perpendicular to the shoulder strap, the chest is the one that is longer. In many models, the shoulder strap and chest strap are the same color, while the abdominal strap has a different color. After putting on the shoulder strap, adjust it so that the circular connecting ring is centered between the shoulder blades of the dog.

                                  Read more:  How To Put A Harness On A Dog

                                  Fasten the abdominal strap into place. Hold the abdominal strap under the belly of the dog and fasten it to the buckle on the other side. Adjust the shoulder and abdominal straps so that they sit comfortably. In the case of small and medium dogs, you should be able to stick your finger under the straps. In the case of large dogs, it should be possible to stick two fingers under the straps. Equipment in general, consisting of shoulder and abdominal belts, should form a clear vertical line. The abdominal belt should not slide to the armpits of the dog.

                                  How To Put A Harness On A Dog

                                  Correct the harness as it should. Make the necessary adjustments so that the harness sits on the dog as it should. The general rule is the ability to stick two fingers under the straps of the strap. Pull the buckle. She should not be unbuttoned. If this happens, it means that the harness is too tight. Try to pull the harness over your head. It should not move. If this happens, you need to tighten the harness tighter. Check before. Pull the harness behind the front to make sure that the loops for the paws are not too loose, and the dog will not be able to pull the paws out of them. Make sure the D-ring is placed on the back of the dog. The front loop should be positioned at the middle of the dog’s chest.

                                  Adjust the chest belt. The chest belt should be horizontal and pass through the brisket. Tighten or loosen the belt as required so that it lays down appropriately. Gently push your fingers on the lower part of the dog’s chest. So you can determine the position of the chest bone. Adjust the sides of the chest strap evenly so that the D-ring is centered on the front. The strap should not sag or bully.

                                  Snap on the leash. The harness is dressed. After you fasten the leash, you can safely go for a walk with the dog.

                                  Stand behind the dog. When the dog is in a sitting position, go behind it and bend down so that it is comfortable and easy for you to carry out manipulations on the whole body of the dog. The dog must sit. Her ass should be clamped between your legs. Do not try to do this when the dog is in an excited state, as you can hurt it. You will not be able to put a dog on a reclining dog.

                                  Put the dog harness on his head. Pull the dog’s hole on the head and adjust the fur and skin so that everything fits tightly, but the dog is comfortable. If the dog has medium or thick fur, place it under the harness straps. If this is not done, the harness will sit too tight on the dog, which will create pressure, friction, tucks and other discomfort when the dog is working. At this stage, the harness must pass through the dog’s brisket. It should also be located above the shoulder blades. Slide two fingers under the neck straps. If this fails, loosen them. If you can stick more than two fingers, tighten the straps.

                                  Unfasten the team. Take the harness with both hands and undo its soft collar part. Fold the chest part in half so that the two ends of the wide bib meet. Use your fingers to pull out the soft collar part and nylon jumpers behind the bib. At this step you should see a hole for the head of the dog.

                                  Hitch your paws one by one. Gently lift one dog’s front paw so that it will bend at the knee, and guide it into the appropriate loop of the harness. Repeat the procedure with the second paw. When properly executed, the bib will be placed vertically in the middle between the dog’s front paws along the sternum. As before, correct the team by checking the hemmed fur, excessive slack or tightness.

                                  Pull out the tail section. The tail part of the harness should be flung down the back to the base of the dog’s tail. If the harness is of proper size, the tail section will reach exactly to the base of the tail. The straps of the harness must also lie flat on the back of the dog. If they are twisted, unwind them and lay again.

                                  If applicable, stretch the back strap over the back. If you use a harness for a weight load on a dog, it must have a fastening strip for the lines in the tail area. This band passes through the back and goes under the tail. Note that not all types of harness may have this band.

                                  Attach a lead, cables, straps for a sled or other belts. The harness should now sit well. Your dog is ready for action.

                                  How to put a harness on a dog

                                  When buying a complex weave of eight straps, the novice owner really does not know what to do with them and how to properly put the harness on the dog. A harness is a leash that is connected to a belt that passes over the upper part of the chest.

                                  PG placement sponsor Articles on "How to put a harness on a dog" How to sew a harness for dogs How to measure a dog How to put a harness on a dog

                                  If you have a very temperamental dog that does not allow you to wear a harness, you need to capture the dog’s waist between your knees. At this time, correctly straighten the harness so that the soft part is inside.

                                  The first thing you need to wear a closed ring on the dog’s neck (dimensions on the harness in the neck may vary).

                                  Now you need to expand the jumper (which connects the closed ring and the strap) so that it is located on the throat.

                                  Next, move the strap to the desired position, thereby limiting the space between the jumper and the closed ring.

                                  Push the dog’s front right paw into the space between the strap and the closed ring. Thus, it turns out that the jumper will pass through the chest, and the right paw will be clothed with a harness.

                                  Now there is one free end that needs to be inserted into the armpit of the left paw.

                                  Now you can fasten the strap. The dog needs to be put on its paws and the closed ring is straightened around the neck so that it does not squeeze, but at the same time fits the dog’s neck tightly. Check the jumper on the chest, it should lie flat.

                                  Try to tighten the strap, otherwise the dog can easily twist out of the loosely fastened straps.

                                  Fasten the leash to the carabiner, adjust the tension of the strap and you can safely go for a walk.

                                  Sidebar

                                  Pin It on Pinterest

                                  Share This